Discussions

Is it possible to add power supply to the RK1 orders that are being processed?

So I finally scored a cm4 (while waiting for the RK1’s). The BMC Flash updated, It boots, web works, etc. I installed a CM4 lite, 2GB, WiFi, no MMC and I can’t seem to get it to power up, using the web and the tpi can set the node power on/off, etc. But the node slot red light never comes on, no lights on the CM4 adapter, or the CM4 (not sure if there are even power lights on the CM4 or CM4 Adapter). I thought I saw the slot Red led was on once, but I get it turned on now. I can press the Key1 and see the power status change (tpi power status), but again no red led. Any thoughts?

Just wondering what the purpose of the T18 header is. I don't seem to see any info on it in the Docs.

Hi all, Can someone help me upgrading the BMC firmware I did try to ssh which is failing and it's expected in older version, now am trying with SD card but doesn't seems to work. Anyone successfully upgrade from `1.0.2` please share the steps. \-Thanks

I am beginning to wonder if I was that naive to believe ... I still have not received my Turing PI Have I been taken for a ride? That there was never ever any Turing PI to be had? Paid in July 2023 and it is now December 2023 - and nothing. Anyone out there? Did I fall for an internet hoax - paid for something that is not real?

I finally got around to trying out my TuringPi 2 (and upgraded the firmware to v2.0.5). I have a CM4 lite (no eMMC or WiFi). I flashed the SD card on my computer and inserted it. However, it doesn't seem to boot. I was also able to flash the node from the web UI, but it doesn't boot then either. I can get the CM4 into MSD mode when I do the following on the BMC: ``` tpi advanced --node 1 msd ``` When I do that, I can get the node to appear to boot up and I can access the SD card and mount it from the BMC. I can also get UART output when I do: ``` tpi uart -n 1 get ``` When I put it back into normal mode, I can't get the CM4 to boot . The lower green LED on the adapter board doesn't light up. No UART output either. I've tried multiple adapter boards and multiple slots. Any suggestions for what I'm missing? Given that I can get the board into MSD mode, it doesn't seem like the CM4 is bad.

I am getting the error below when trying to issue the command: PS C:\\Users\\haplo> ssh [[email protected]](mailto:[email protected]) dd of=/dev/mmcblk0 \< C:\\Users\\haplo\\Downloads\\tp2-firmware-sdcard-v2.0.5.img At line:1 char:43 - ssh [[email protected]](mailto:[email protected]) dd of=/dev/mmcblk0 \< C:\\Users\\haplo\\Downloads\\ ... - ``` ~ ``` The '\<' operator is reserved for future use. + CategoryInfo : ParserError: (:) \[], ParentContainsErrorRecordException + FullyQualifiedErrorId : RedirectionNotSupported

How do I get the hdmi output form nodes 2 - 4? Node 1 works fine but when I move the USB_OTG to node 2,3 or 4 I would expect the HDMI to move with it. How can I do that or are nodes 2,3 and 4 all meant to be headless? The docs are rather sparse in this area

"Order #712055 was placed on July 28, 2023 and is currently Processing. "Order estimated delivery between Oct 27th - Dec 1st" Well, December the 1st is tomorrow, but I still haven't heard anything about RK1 since the August update. What's the status? Please make an update on RK1s, it is really not nice to keep your clients in the dark for months, especially when the order is $1000 worth.

Hello everyone, Given that the Mini ITX case is going to take a while, end of Q1 at best, what are other alternatives and/or what cases are you using in your case? Thank you